x
L
O
A
D
I
N
G
- Andalan Admin
- 0 Comments
- 2973 Views
MINING CASE HISTORY
The PC3000 Backhoe bucket hydraulic cylinder on unit EX 702 at Adaro Plant, South Kalimantan, recorded 7,023 HM of service. This exceeded the 6,000 HM service-life target by 1,023 HM, or 17.05%.
PC3000 Bucket Hydraulic Cylinder on Unit EX 702
This project record covers the bucket hydraulic cylinder of a PC3000 Backhoe installed on unit EX 702. The cylinder was installed on 7 March 2008, when the unit’s hour meter showed 24,000 HM.
The cylinder was subsequently removed from the unit on 27 April 2009, when the hour meter showed 31,023 HM. These two readings provide the basis for calculating the cylinder’s service hours in this project record.
Recorded Service Life Exceeding the 6,000 HM Target
| Stage | Date | Unit Hour Meter |
|---|---|---|
| Cylinder installation | 7 March 2008 | 24,000 HM |
| Cylinder removal | 27 April 2009 | 31,023 HM |
Based on the difference between the unit’s hour meter readings, the cylinder recorded 31,023 - 24,000 = 7,023 HM of service. HM refers to the unit’s hour meter readings.
Compared with the 6,000 HM target, this result was 1,023 HM higher, equivalent to 17.05% above target. These figures describe the cylinder’s recorded service in this specific project.
AFS Experience Supporting Mining Cylinder Requirements
This PC3000 Backhoe service record forms part of PT Andalan Fluid Sistem’s experience supporting hydraulic cylinder requirements in the mining sector. The installation date, removal date, and hour meter readings provide a clear basis for comparing recorded service with the target for this project.
For hydraulic cylinder repair and reconditioning, please contact the PT Andalan Fluid Sistem team. Share the unit type, cylinder condition, service history, and equipment location so that your requirements can be discussed according to your unit’s condition.